Residual paper on core is fed on to upper deck and Then
paper is automatically removed from core.
After residual paper is removed, the core isdischarged
on the lower deck for removal.
This is a patented, fully automatic disc cutter to cut
end discs used for paper roll wrapping.
The patented automatic size change mechanism performs
its function after receiving the roll diameter data from
a scanner.
Specially manufactured sharp knives reduce the amount
of paper dust during cutting.
Patented inclined rubber rings gently stretch the paper
and other webs. Its unique straight roll configuration
can allow the paper path to turn 180 degree.
The expander roll requires no maintenance.
This equipment can accurately measure the size of paper
to 0.1mm.
Maruishi can supply 2 models for large size and cut size
sheets. Sheet squareness is also measured.
An operator can confirm the sheet is cut according to
specification using PC scanner.
It measures the quality of cut surface (length of fiber),
sheet length, and diameter of holes and their location
and then prints out the information. A PC based system
is used.
The system cuts reject paper roll by a hydraulic mechanism.
Different roll-in and roll -out systems are available.
It removes reject paper from skids, and restacks only
good paper on the pallet.
This machine helps reduce manpower and also increases
the capacity of the ream wrapping machine.
Specially-designed rotating brushes and a vacuum device
replace conventional manual operations and automatically
removes paper dust from skids.
It automatically adjusts for size changes.
It simultaneously removes the paper dust on all four faces
of the skid. It can handle up to 60 skids in one hour.
It automatically adjusts the paper to the center of wooden
pallet.
With specially designed mechanisms, it can align in all
four directions. It can handle up to 60 skids per hour
with fully automatic operations.
Each skid is automatically removed from a sheeter (1-
3 sheeters) and transported to the next packing station.
The robotic system aligns the direction of pallet runners
to fit the process requirement.
Smooth robotic handling will prevent deforming of the
paper stack.
Click the picture icon
for motion picture.
With roller diameter as small as 42mm (pitch 45mm), this conveyor
is able to transport palletized products with foot of 60mm,
very smoothly and noiselessly even at conveyor joint areas.
Less maintenance due to small roller diameter and slider design.
Skid Sheet Counter is able to count the exact number of
sheet products on a pallet using special optic and computer
technology. With this accurate sheet counting system, extra
sheets can be sorted out for economic reimbursement.
A special robotic system integrates optical sheet counting and
laser marking technology as one fully automatic operation.
This new system eliminates the taper inserter which used
to be a trouble maker.
